Senglanot is a 30.4 km red square downhill singletrack in Llinars del Vallès featuring a couple of technical sections with rockgardens, berms, and some jumps. Both technical sections are challenging, one includes a chicken line while the other does not. After finishing, connect to DH Llinars to complete the descent. Expect a short climb when linking to the next descent.
Loading live trail conditions and forecast…
Forecasts that know your trail
No saved trails yet
Open a trail or location and tap the bookmark icon to save it here.
Nothing to compare yet
Save two or more trails or locations and they'll appear here side by side.
Choose a short summary, full details, or just a title for new Strava uploads. Your personal notes and custom titles stay yours.
No location set
Search for a location or save a trail. The matrix will load automatically when you open this tabGeneric weather apps tell you whether it's going to rain. That's not the question riders ask. MudWatch turns soil physics, terrain data, and live atmospheric models into a per-trail score and specific recommendations you can act on.
Standard weather forecasts read the temperature at a low-elevation grid point, not at the trail. For a high-altitude trail, that gap can be 1,000m or more. Without correction, you get the valley temperature instead of the trail temperature.
Every trail in MudWatch has a real GPS track with elevation. We compute the trail's actual altitude from those coordinates and lapse-rate-correct the displayed temperature, the apparent ("feels like") temperature, and the soil temperature. The conditions panel shows "(adjusted for trail altitude)" whenever the correction is meaningful. The cold-and-hot rules in the recommendation engine fire on the corrected number, so alpine trails get accurate frost warnings even when the valley is shirt-sleeve weather.
Knowing the trail is wet now is half the question. The other half: when will it be back in prime condition?
MudWatch reads soil moisture forward through a 7-day window and combines it with evapotranspiration (the rate the soil loses moisture to sun, wind, and dry air) to predict when conditions will recover. If today is too wet, the conditions panel shows you when the next dry window opens. If the soil never drops back to a rideable level inside the forecast horizon, you'll see "stays wet through forecast window" instead of getting your hopes up.
The atmospheric forecast tells half the story. The trail's own terrain tells the other half. MudWatch analyses each trail's GPS polyline to compute its dominant aspect (which compass direction the slopes face) and its average steepness, then biases the drying prediction accordingly:
The bias surfaces in the trail's recommendations as an extra line beneath the dry-by prediction, e.g. "Slopes face north; expect drying to lag the forecast by 12-24h on shaded sections".
Every trail page renders the GPS track as a 3D ribbon coloured by gradient. Easy spinning stays cool blue, mid-steep ramps shift through green and amber, and the punchy double-digit pitches glow red. Drag to rotate, scroll to zoom, hover to read the gradient and elevation at any point.
The same atmospheric model that scores the ride drives the view's weather. Live drizzle slants in the wind direction at the rider's location. Snow drifts at a gentler angle. Fog softens the scene into low cloud. Thunderstorms darken the ceiling and fire jagged lightning bolts that briefly light up the entire model. A wind arrow rotates with the ground plane so you can see which way you'll be fighting on the climb.
A bone-dry trail is dusty hardpack: corners blow out, dust over the surface eats grip. A waterlogged trail is mud: tyres pump, lines wash out, riders erode the trail. The sweet spot is tacky. Moist enough to bind, not so wet that it pumps. The score is shaped to match that physical reality, not "more rain equals worse."
The grip curve shifts per surface type. Rock and pavement barely care about moisture. Roots get genuinely dangerous when wet. Clay turns gluey from the first sign of damp. Sand prefers slightly moist over bone-dry.
| Surface | How it behaves |
|---|---|
| Rock | Drains fast. Almost no wetness sensitivity until properly saturated. |
| Roots | Fine when dry, treacherous when damp. Heavy penalty from "damp" onwards. |
| Clay | Sticky and slippery in equal measure once damp. Penalised earlier than other surfaces. |
| Sand | Loose and slow when bone-dry. Firm and grippy when slightly damp. Mud when wet. |
| Loose | Surface fails when wet. Dust over hardpack a different problem when dry. |
| Hardpack, gravel | Drains fast, peak at tacky, dust at the dry end of the curve. |
| Loam, dirt | The default curve. Standard MTB sweet spot at 18-28% saturation. |
So a "wet rocky descent" and a "wet rooty descent" get scored very differently, even though the underlying soil moisture reading is the same.
Most apps glance at recent rain. MudWatch reads the soil at two depths and uses whichever is wetter during your likely riding window. The shallow layer responds in minutes. The deeper layer takes days. Reading both lets us tell the difference between "rain just stopped, surface is slick" and "soaked through to the bones".
"8/10 today" doesn't help you plan. MudWatch scores the next 12 hours individually, weighing soil state, rain timing, temperature comfort, and the daylight budget for a trail of this length. The recommendation comes back as a specific time: "around 09:00".
In tropical climates, that's early morning or late afternoon. Midday gets pushed down by heat. In northern winter, it's mid-day. The cold ends of the day get penalised instead. Same model, opposite advice, no climate switch needed.
Sunset-aware. A window that wouldn't leave enough daylight to safely finish the ride gets hard-cut. Lost-light-on-the-mountain is a real risk we don't pretend otherwise.
Real PM2.5 readings and US AQI. Recommendations soften or escalate based on whether sensitive groups should be cautious.
Flags very high and extreme UV days where sun protection genuinely matters, especially on long climbs without canopy.
Per-species counts for grass, birch, ragweed, alder, mugwort, and olive. Allergy-prone riders get a heads-up before they're out on the trail.
When the trail tops out above the day's freezing line, expect frost on north-facing rock, slick timber bridges, and ice in the shade. Even when the valley feels mild.
We watch atmospheric instability (CAPE), not just rain forecasts. High CAPE on a warm afternoon means storms can pop up from a clear sky. Hazard-level alerts before the first lightning strike.
We compute the sun's azimuth at low-light hours and compare to the trail's start-to-end bearing. East-running trails get a "low sun until 06:42" callout. North-south trails get the all-clear.
Wind direction vs trail direction. If the climb out is into a cold headwind at 25 km/h, you'll know to bring a wind layer before you set off.
Real measured precipitation over the last 24, 48, and 72 hours. Not estimated from cloud cover or humidity. Actual rainfall.
The mini-map on a trail page is the trail's actual shape. The elevation profile is its actual climb and descent. Length, max altitude, start and end heights are all derived from the GPS, not from metadata that might be wrong. Hover the elevation chart and a synchronised dot moves on both, with distance and altitude at that point.
The trail's bearing falls out of the same data and powers the sun-glare and headwind features. Without a real GPS track, none of those would exist.
MudWatch Beta. Mountain bike trail conditions, modelled.